9
Elite XL Sheet Feeder Installation Guide
16ppm
10a.If there are two sheet feeders, connect the lower sheet feeder control
cable to the upper sheet feeder.
Grasp the control cable of the lower sheet feeder and slowly extend it
beyond the sheet feeder’s housing. Orient the cable’s connector so that the
two “tabs” are facing to the right and plug the cable into the connector in
the upper sheet feeder.
11. Replace all of the control cable covers.
Insert the top edge of the cover first and then pivot the bottom half
down and into place.
12. Reconnect the interface cables and the power cord to the printer.
Elite XL
Control cable
Upper
sheet feeder
2 tabs should
face to the
right
Lower
sheet feeder
