GCAN GCAN-IO-8000 User Manual Download Page 5 | Manualshive

Page: 5 / 35

background image

5

Shenyang Guangcheng Technology Co., Ltd.

CANopen bus coupler

—

GCAN-IO-8000

Product data sheet

Shenyang Guangcheng Technology CO.LTD.

1.3 Typical applications

Connect with the distributed bus terminal module to form a complete control node;
Perform data collection and data transmission with CANopen protocol.

2. Equipment installation and use

This chapter will explain in detail the installation method, wiring method, the
meaning of the indicator light and the meaning of the interface of GCAN-IO-8000
CANopen bus coupler.

2.1 Module appearance and dimensions

The  appearance  of  GCAN-IO-8000  is  shown  in  Figure  2.1.  GCAN-IO-8000
CANopen  bus  coupler  includes  2  communication  interfaces,  1  controller
programming  interface,  1  group  controller  power  interface,  2  groups  I/O  power
interface, 2 groups shielded wire interface. Among them, the communication interface
includes a CAN bus interface and an RS232 interface.

Figure 2.1 Appearance of GCAN-IO-8000 CANopen bus coupler

2.1 Module fixing

The installation method of GCAN-IO-8000 CANopen bus coupler is shown in figure
2.2, you need to use a flat screwdriver for auxiliary installation.

«
...
3
4
5
6
7
...
»

Summary of Contents for GCAN-IO-8000




































Reviews:

No comments

Related manuals for GCAN-IO-8000

Brand: ABB Pages: 86

Brand: MacDon Pages: 89

Brand: Yates Pages: 2

Brand: JAC Pages: 100

Brand: AcceleDent Pages: 3

Brand: Zero 88 Pages: 32

AquaPure Ei Series

Brand: Jandy Pages: 4

Brand: janitza Pages: 30

AquaPure Ei Series

Brand: Jandy Pages: 8

Jandy Pro Series

Brand: Jandy Pages: 16

Brand: Quick Pages: 24

Brand: JDS Uniphase Pages: 144

IP Video Test Option HST-3000

Brand: JDS Uniphase Pages: 14

Brand: Accurate Technology Pages: 10

Brand: Gage Bilt Pages: 28

Optima XR200amx

Brand: GE Pages: 46

Brand: Ebyte Pages: 7

Brand: U.S.SAWS Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands