5
Shenyang Guangcheng Technology Co., Ltd. CANopen IO 8DI/8DO-GCAN-4055
Figure 2.2 GCAN-4055 port
3 Configuration
Users can set the node number and baud rate of GCAN-4055 using the DIP switch.
Please note: The new parameters will not take effect until the converter power on
again.
3.1 CAN node number configuration
As shown in figure 3.1, the user will set the DIP switch to "ON", bit is "1", set to
"OFF" , bit is "0" . The DIP switch 2-8 can set node ID, the eighth is the lowest bit,
the second is highest bit. The node ID is the sum of the decimal values. node ID has a
valid range of 0 ~ 127.
Please note: The first switch default is off, please do not change it.
