11
www.greenerblast.com
Rinsing Function
(WATER ONLY)
1. Main Pot Shutoff/ Slurry Hose valve is off
2. Blast selector switch set to off
3. Surface rinse selector set to rinse
4. Rinse away
Surface Blow Down Function
(AIR ONLY)
1. Main Pot Shutoff/ Slurry Hose valve is off
2. Blast selector switch set to off
3. Surface rinse selector set to off
4. You can now dry your surface
Important Things to Remember
1. When you are not blasting for any extended length of time, the main pot/slurry valve MUST
be closed. This is especially critical when the compressor is shut down (Blast hose will fill
with the remaining blast media).
2. The machine performs best with a #8 straight bore nozzle. # 6 - # 12 Straight bore nozzles can be
used effectively depending on the job requirements and the desired surface finish.
3. When you are blasting, the pot pressure and blast pressure will equalize somewhat, and show
different values than you selected during the set up phase. This is normal.
Do not
try to adjust pot
& blast pressures while running.
