TubeMU |
User's Guide
7
Chapter 3 - Operation Guide
Way of working with TubeMU
As previously mentioned about the presets, they are a good start to understand how
they work in a few minutes. The parts are defined and very intuitive.
However, one way to understand its processes is to start like this:
RATIO
:
.
Adjust the control over (5).
GR – LEVEL:
.
Select the switch, in "GR".
INPUT:
.
Act clockwise to amplify signal.
VUMETER:
.
Adjust “INPUT” and “RATIO” to the desired compression level,
nearby or located at the “green” mark. You can use levels of
softer compression at points (1 to 5).
OUTPUT:
.
Compressor general output setting. With the “COMP - LIMIT”
set to "LIMIT" we can exert pressure on the peak limiter.
Happy MIX !
© Copyright 2021 Germán Bou / gbSoundlab - All Rights Reserved
