7
Link/Activity Indicator:
When the LED is off, there is no link between the PCIe 10G SFP+ Network Card and the network
When the LED is on, a link is established, but there is no traffic on the network
When the LED is flashing, there is traffic on the network to which the PCIe 10G SFP+ Network Card is
connected
2.2
Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the
motherboard. Push the board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Secure the computer cover and reconnect the power cord.
2.3 Driver Installation
The following section shows you how to install PCIe 10G SFP+ Network Card driver on different operating
systems.
Installation for Windows
Insert the provided CD into your disk drive. The CD-ROM will start automatically. The following screen
will show up and please click “
Install Driver
”
.
*Note: Actual image may vary
Note
: If the install program doesn’t run automatically, please locate and double-click on the
Autorun.exe
file in
the CD to launch the install program.
