Figure 5
4. Low Battery Icon
A low battery indicator icon will be shown on the screen when the remote sensor battery is about
to run out. When the icon
appears (the battery voltage is lower than 2.4V), replace the batteries
in the sensor with fresh batteries. Be sure to never mix old and new batteries, and never mix
battery types such as alkaline and lithium together.
5. Screen Display Operation
There are total of 4 control buttons on the front of the machine:
C
,
MODE/SET
,
MIN/MAX/-
, and
LIGHT/SNOOZE
.
5.1 Quick Display Mode
While in Normal Mode, touch (do not hold) the
SET(MODE)
to toggle between week/second,
outdoor temperature/Dew Point, ABS/REL pressure display, and normal time display/alarm time
display mode.
1.
The First Touch:
toggle between Week and Second display (default: week) : “Week” value
starts flashing, touch(do not hold) the
MAX/MIN/-
or
C
choose your desired display
mode. Press the
SET(MODE)
to accept the change and advance to the next display mode.
2.
The Second Touch
: toggle between outdoor temperature and DEW POINT(default:
temperature): “TEMP” starts flashing, touch(do not hold) the
MAX/MIN/-
or
C
to
choose Temperature or Dew Point displayed on the screen. Press the
SET(MODE)
to accept the
change and advance to the next display mode.
3.
The Third Touch:
toggle between
ABS(Absolute Pressure) and REL(Relative
Pressure)(default: absolute): “ABS” starts flashing. Touch(do not hold) the
MAX/MIN/-
or
C
to choose ABS value or REL displayed on the screen. Press the
SET(MODE)
to
