GBlife PT3378 Instruction Manual
Once the Weather Station receives the signal from transmitter, temperature and humidity
transmitted by "sensors" will be displayed in the area of "sensors"
More wireless transmitters, up to 3 can be used for each Weather Station. The different
wireless transmitter is not allowed to share common channel. Channel ( selectable among 1,
2 and3) can be selected, by pressing “
▼
”key to switch among the channel for each outdoor
transmitter. When symbol is displayed
"
"
, the Weather Station will be in mode of
auto-toggling, which enable the switchover at random among the (1/2/3) every 5 seconds
If only one transmitter is available, default channel will be channel 1. In such case, please
disable the function of channel auto-switchover (by pressing “
▼
”key till symbol
disappears, and then use “
▼
”key to set the same channel as transmitter
）
to make
outdoor readings normal.
Manual reception of transmitted signal: press “
▼
”key for 3 seconds to start manual data
transmission if the main unit fails to receive the signals transmitted by transmitter (“- -”
shown in LCD). When remote temperature becomes a symbol of animated RF antenna, the
base station will receive wireless signal from remote transmitter.
12. Max/Min Temperature and Relative Humidity
Press "MEM" key to toggle indoor/ remote Max/Min humidity data,
Once to display Max humidity
Twice to display Min humidity
Third to restore current value
Press "MEM" key for 2 seconds to reset Max/Min temp. and humidity. It will set current
value as pre-set Max/Min.
Warmly Hint:
Once temperature reading is bellow preset Min, it will display
LL.L.
Once temperature
reading is above preset Max, it will display
HH.H.
13. Remote Temperature Alarm Settings
HOLD “ ”key for 2 seconds till temperature alert icon starts flashing
When temperature upper limit alert starts flashing, use
“
▲
” and “
▼
”
key to set the desired
Max temp, press “ ”key for confirmation
