3
3.0 INSTALLATION PROCEDURES
CAUTION: Two people are
required for the below
installation procedure.
1
. Using the hand grips (a) provided “figure
1”, place the machine head
into the top of the cabinet. The
control panel may face toward the front
or back of the cabinet.
2
. Open the door by pressing on the
door knob and place the hand grips
(a) located in the cabinet base (b) “figure
2”, into the holes found in
the cabinet.
3
. Insert a plastic bag into the bag
frame from the under side of the
rail; fold over all four sides and
slide back into the guide rails.
4
. Connect the power cord to a single
phase socket rated at 15 amps.
Figure 1
Figure 2
