![background image](http://html.mh-extra.com/html/gbc/rls32/rls32_instruction-manual_571098007.webp)
Guarantee
ACCO Brands warrants its products and their parts
against defects in materials and workmanship under normal
use for a period of 24 months from the original date of
purchase.
During this period we will repair or replace a defective product
or part subject to the following warranty conditions:
The warranty applies only to defects in materials and
workmanship under normal use and does not extend to
damage to the product or parts which result from:-
anyone other than an authorised ACCO Brands Europe
service centre.
accident, neglect, abuse or misuse owing to failure to
comply with the normal operating procedures for a product
of this type.
Nothing in this Warranty shall have the effect of excluding
the liability of ACCO Brands in respect of death and
personal injury caused by the negligence of ACCO Brands.
This Warranty is offered (subject to these terms and
conditions) in addition to, and does not affect your statutory
rights.
Additional Guarantee
ACCO Brands guarantees the cutting blades of the
shredder to be free from defects in material and workmanship
for 20 years from the date of purchase by the original
consumer.
* Please note that the cutter blades will be progressively worn
down by shredding fastened sheets (staples and paperclips)
- this is not covered in the warranty. With regards to CD
shredding, GBC large office shredders have been designed to
shred up to 500 CDs during the warranty period. Excessive CD
shredding will wear the cutters and is not covered within the
warranty.
These conditions shall in all respects be governed and
construed in accordance with English Law and subject to the
exclusive jurisdiction of the English Courts.
Bin Full
When the bin is full the shredder will not function and the bin
full symbol will illuminate red.
When this happens you must empty the bin.
t
Open the door and slide out the waste sack support frame.
Carefully remove the waste sack from the frame.
Once the waste bag has been disposed of and replaced, close
the door and press the auto button to resume shredding.
Note: RLX20, RLM11, RLSM9 Models - Once the waste bag
has been reinserted and/or cabinet door has been closed, the
shredder will run in reverse for three seconds, stop for two
seconds and then forward for three seconds to clear away
any remaining paper from the cutter mechanism. This ‘self-
cleaning’ mechanism is additional jam prevention technology
from GBC.
Service
We recommend these machines are serviced every 6 -12
months by a GBC service engineer - see the back of this
booklet for the contact details of your local service centre.
Charges for service applies.