30
PIPE 8
Original Instructions
—
rev.2014
—
in compliance with § 1.7.4 of the Machinery Directive
2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43
–
25046 Cazzago San Martino (Bs)
–
Italia
–
Tel. + 39 030 7451154
–
Fax. + 39 030 73 56 629
ORDINARY MAINTENANCE
ORDINARY MAINTENANCE
ORDINARY MAINTENANCE
We suggest to perform a service c/o G.B.C. Industrial Tools S.p.A. premises
every 400 hours working cycles.
PERIODICAL CHECKS
PERIODICAL CHECKS
PERIODICAL CHECKS
Verify the general conditions of the machine;
Always use the lubricator when using pneumatic machines
Ensure the lubricator is mounted the nearest possible to the machine
and that the lubricant contained is supplied by G.B.C. In-dustrial Tools S.p.A.
only.
Perform a compressed air periodical cleaning on the threaded part of the guid-
ing shaft and in the rear part of the machine.
Always ensure that the seats of the tools on the chuck are clean
Every 20
–
30 hours ensure the security valve has no air leaks
Ensure no air leaks are present on the air supply system nearby the connection
between the machine and the hose.
Introduce some drops of gasoline or similar oily solvent in the air intake nipple
of the pneumatic motor and start the machine in idle.
Always use well sharpened tools to obtain the maximum result.
G.B.C. Industrial Tools is at your disposal for any information you may re-quire
about the above mentioned procedures and for any general clarification you may
need.