![background image](http://html1.mh-extra.com/html/gbc/62fm/62fm_installation-and-operation-manual_3879588022.webp)
1
Operating Instructions
62FM L
AMINATOR
6. O
PERATING
I
NSTRUCTIONS
G
ENERAL
O
PERATION
For thermal processes, the heat rollers need to be
brought up to the proper temperature before you
load films or run items through the laminator. If the
laminator will be idle for more than four hours, lower
the temperature of both rollers to 180 °F (80 °C).
For PSA films and mounting processes, remove the
chill idler.
The safety shield and feed table must be in the
normal operating position.
Select a job mode and ensure the proper speed
and temperatures are set.
Set the roller handle to one of the laminating
positions.
Press the
Press/Release
button.
The main rollers gap.
WARNING:
Hot surfaces and pinch points.
Keep fingers and hands away from the heat pressure
and pull rollers. Clothing, jewelry and long hair could
be caught in the rollers and pull you into them.
Failure to adhere to this warning could result in
serious personal injury.
Press the
Run
button.
Press the
Press/Release
button.
The main rollers close.
Adjust unwind and rewind tensions as necessary.
Align the leading edge of the item square to the
heat roller nip.
1.
2.
3.
4.
5.
6.
7.
8.
Fig 6-1. Aligning the Item With The Rollers.
With both hands, and an outward force, push the
image slower than the speed of the rollers into
the nip of the heat rollers.
Fig. 6-2. Feeding Items Into the Laminator.
CAUTION:
Avoid forcing the image into the main
roller nip as this action will cause the corners of the
leading edge to buckle and create a wave.
9.
Summary of Contents for 62FM
