INSTRUCTIONS
TURN ONE OTTOMAN INTO FIVE
Remove the Top Seat Cushion
FIGURE 1
Remove the top seat cushion of the ottoman by lifting it straight up. (Fig 1)
Remove the 4 ottoman frames that are stored inside.
Notes:
•
The bottom side of each frame has rubber feet.
•
Each frame is labeled either A, B, C, D or E.
•
Upon initial receipt, the wheels must be attached to the main ottoman frame (A).
To do so, simply place a wheel on each of the bolts located on the 4 bottom
corners of the main frame. Secure each wheel with a nut.
Remove the 4 Side Seat Cushions
FIGURE 2
Remove the 4 side seat cushions by slightly pulling the cushions upward then
outward. (Fig 2)
Note: Each cushion is labeled either A, B, C, D or E.
Attach the Cushions to the Frames
FIGURE 3
To Attach Cushions B, C, D & E:
•
Place each cushion on a clean flat surface with the cushion side down.
•
Place the top of the frame into the brackets on the underside of the cushion.
The frame will go behind one bracket and then into the channel of the other
bracket.
•
Swivel the lock to secure the frame in place. (Fig 3)
To Attach Cushion A:
•
Align the 4 pins on the underside of the cushion with the four holes in the top
of the frame.
Notes:
•
Be sure to pair each cushion with its corresponding frame.
•
Each cushion only attaches to its corresponding frame.
TURN FIVE OTTOMANS INTO ONE
Simply Reverse All of the Steps Above
•
Remove the main top seat cushion of the ottoman from its frame by lifting it straight up.
•
Remove the 4 side seat cushions from each ottoman frame by placing the ottoman on a clean flat surface with
the cushion side down. Swivel the lock to unsecure the frame from the bracket. Gently remove the frame from
the brackets.
•
Attach the 4 side seat cushions to the Main Ottoman frame by aligning the tabs on the underside of the cushion
with the holes on the main frame. Slightly push the cushion inward then downward to secure in place.
•
Place the 4 ottoman frames inside of the main ottoman frame. The frames nest in descending size order.
•
Attach the top cushion to the main ottoman frame by aligning the 4 pins on the underside of the cushion with the
four holes in the top of the frame.
CARE:
To clean, wipe with damp cloth.
Made in China
