Step 8
Fit the Cover Trims to the front
and back of the building as
shown in the illustration using
30mm screws. Trim the length
of the cover trims to the
required size before fitting if
necessary.
Pre drill to avoid splitting.
12x30mm Screws
30mm
screw
Pre drill
hole
Step 10
10
For the no window version go to step 11
30mm
screw
Pre drill
hole
10
10
Fix the window strips to the
two pieces of framing that sit
alongside the outside edges
of the window with 3x30mm
screws for each strip.
6x30mm Screws
9
9
Side View
16
Place the
plastic window
cill onto the
Window Panel
in the same
way as shown
on both
diagrams to the
left.
Step 9
Attach the faiscas to the roof
leaving a slight overhang at the
top.
Fit the fascias to the roof over
the felt and secure in place with
40mm screws as shown.
Pre drill to avoid splitting.
16x40mm Screws
9
8
14
8
8
14
9
9
19
Fit the styrene sheets on top of
the window cill.
When positioning the styrene
sheets ensure there is an equal
distance between them and at
either side of the windows.
8
Pre drill
hole
40mm
screw
30mm
screw
9
9
Pre drill
hole
9
Attach the three window strips
at either side of the windows
using 3x30mm screws each.
Make sure the screws enter the
framing in the window panel
and not the styrene.
9x30mm Screws
P 10