ENG
6
Important information
Warning!
•
Do not insert or remove the SD card when the device is on. This
can lead to the built-in MVR malfunction. Wait for 30 seconds
after MVR shut down and only then safely remove the memory
card.
•
Set the correct time and date before using the device.
•
Use at least 0.5 seconds time interval while pressing control
buttons, this guarantees proper functioning of the device.
•
When connecting the device, use only the original power supply
cable.
•
If after you have started the car (when the power supply cable is
connected to the MVR), the device failed to switch to the recor-
ding mode automatically, simply unplug the power supply cable
for ten seconds and then try again.
•
Use the restart option by (long pressing
ON/OFF
button) in the
following cases:
• power indicator is not on when the power supply cable is con-
nected;
• the device does not switch from the standby to the recording
or control mode;
• the device fails to function properly.
•
Files protected from overwriting by G-sensor are recorded in a
loop with a 15 files limit. Closely monitor the free space remaining
on the memory card to avoid loss of protected files due to loop
overwriting that takes place within the limits allocated for such
files on the memory card.
