Gazer CM70 Series, User Manual

Page: 18 / 60

18
EN
MirrorLink Wi-Fi
For MirrorLink function to work via Wi-Fi, both devices (the multimedia system and the OC Android mobile device) must be
connected to the same Wi-Fi network. There are several ways to do that:
1. By connecting both devices (a mobile device and the multimedia system) to the same Wi-Fi network (home network,
public network, Wi-Fi network of mobile 3G router, etc.).
2. By creating a Wi-Fi network on a mobile device and connecting the multimedia system to it.
3. By creating a Wi-Fi network on the multimedia system and connecting a mobile device to it.
To setup a Wi-Fi network on the multimedia system or an OC Android mobile device, do as follows:
• Open «Settings» – «Router mode»
• Enable the «Wi-Fi hotspot» option
When this function is used for the first time, one needs to connect the mobile device with a USB cable and enable the «USB
debugging» function on the mobile device. See MirrorLink USB item of this guide for a detailed description of the activation
procedure.
Once both the devices (the multimedia system and the Android mobile device) are connected within a single Wi-Fi network,
one can proceed to enabling MirrorLink function.
To do this, follow the steps below:
• Open PhoneLink app available in the installed apps list
• Select «Android WiFi» option
• Use a USB cable to connect the mobile device to the multimedia system
• Confirm the connection on the mobile device
• Disconnect the USB cable after the successful connection when «Disconnect the USB cable» message appears on the
screen
Note. Use the «Set up Wi-Fi hotspot» item of this menu to change the access password and the name of the newly
created network.
Note. Connection with a USB cable is required only when MirrorLink Wi-Fi function is used for the first time. After that,
the devices will only need to be connected to the same Wi-Fi network.
AirPlay and MirrorLink Functions