Gazelle GD1320, User Manual, Page: 3 / 8

3
EN
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Drill safety warnings
1) Safety instructions for all operations
a) Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b) Use the auxiliary handle(s). Loss of control can
cause personal injury.
2) Safety instructions when using long drill bits
a) Never operate at higher speed than the
maximum speed rating of the drill bit. At higher
speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in
personal injury.
b) Always start drilling at low speed and with the
bit tip in contact with the workpiece. At higher
speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in
personal injury.
c) Apply pressure only in direct line with the bit
and do not apply excessive pressure. Bits can
bend causing breakage or loss of control, resulting
in personal injury.
UK power plug warnings:
Your product is fitted with an BS 1363-1 approved
electric plug with internal fuse approved to BS 1362.
If the plug is not suitable for your socket, it should be
removed and an appropriate plug should be fitted in its
place by an authorized customer service agent. The
replacement plug should have the same fuse rating as
the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a mains socket elsewhere.
Model GD1320
Rated Power Input W 710
No-load Speed /min 0-3000
Rated Impact Frequency …/min 0-45000
Max. Drilling Capacity
Steel mm Ø13
Concrete mm Ø16
Wood mm Ø30
Net Weight kg 2.0
※ Due to the continuing program of research and development, the specifications herein are subject to change
without prior notice.
※ Illustrations,figures and photos may vary slightly due to program of continuous product improvements, please
in kind prevail.
Technical Data
This product is a hand-held electric drill powered by single phase series motor.
This product is suitable for drilling on steel, plastic, and wood or similar materials under general environmental
conditions.
The performance and specifications of this product are shown in the table below:
Symbol
Always Wear eye protection
To reduce the risk of injury, user must
read instruction manual
WARNING
Class II tool