1
1. Introduction
●→
Before starting to use the tool please read the instruction manual carefully.
●→
Use this tool exclusively for its determined use.
Mounting and assembly of connecting material with the help of this tool must only be
performed by specially trained personnel.
●→
This instruction manual must be carried along during the entire life span of that tool.
●→
The operator must
-guaranty the availability of the instruction manual for the user and make sure, that the user
has read and understood the instruction manual.
2. Labels
On the labels fixed on the unit you
’
ll find the type specification, name of the manufacturer
and/or the company logo. The serial number is on the hydraulic cylinder.
3. Warranty
If correct operation is guaranteed and regular service is provided our warranty is 1 year from
the time of delivery.
4. Description of the hydraulic crimping unit
A crimping process is characterized by the closing motion of the dies. The cable lug or
connector will be position in the stationary half of the crimping die. The piston will push the
moving part of the die towards the compression point.
The crimping process is complete when the dies contact and the maximum operating pressure
of the pump is reached.
5. Remarks with respect to the determined use
5.1 Operation of the unit
1) Firstly you have to select the right dies for the intended application. Then connect the
crimping head to the high pressure hose and roll out the hose completely.
2) Insert the dies laterally and bring the crimping head into position.
3) Start the pump until the dies are completely closed.
After the crimping process has been completed and the piston has been retracted remove the
