background image

   

12

 

   

13

 

Suspension

Some models feature suspension for optimum comfort. The 
correct adjustment of the suspension system depends on the 
weight of the rider and the terrain on which you bike.

Suspension seat post

In many models, Gazelle has put a suspension system within 
the seat post. In the chapter “Maintenance and inspection”, on 
page 26, it is indicated how you can set the spring tension of the 
suspension seat post.

Beware: If you brake hard, the front suspension will deliver an up and 
downward movement that can be dangerous, especially in curves. 
This effect is weakened if you use the front brake as well as the rear 
brake. Therefore, never brake with the front brake only!

Suspension front fork

Gazelle’s suspension front forks can be divided into two 
categories. The first type works by means of mechanical springs 
with elastomers, the other type uses air pressure.

Front forks using air pressure

These front forks can be adjusted by increasing or lowering the 
air pressure. The desired pressure depends on the weight of the 
rider and the desired suspension action. The air pressure can be 
adjusted using the supplied pump.

Instead of using air, the suspension front fork with elastomers uses 
mechanical springs with elastomers for suspension. This is a cell-
like, plastic spring element. This type of suspension can be adjusted 
by means of the turning knobs on top of the front fork (A in fig. 13).

Please note that the tension of the springs on both sides should 
be the same. More information about this can be found in the 
chapter “Maintenance and inspection”, on page 26.

Some models with a suspension front fork offer not only the 
possibility to adjust the spring tension but also to temporarily 
turn off the suspension completely, the “Lock-out” function (B). 
This is recommended to prevent loss of energy during a climb 
(fig. 14).

Adjusting the rear suspension unit

For Gazelle bikes with rear (air shock) suspension, the firmness 
of the ride can be altered by adjusting the air pressure in the 
rear suspension unit. This can be done using the pump supplied 
(fig. 15).

Handlebar grips

The ergonomically designed handles ensure that the load on 
your hands during cycling is minimized. Due to temperature 
differences, the action of sunlight or as a result of intensive use, 
the handles can become loose over time. In that case they need 
replacement. Your Gazelle dealer will be happy to take care of that.

Adjustable handles

To prevent handles from becoming loose, Gazelle has developed 
handles that can be secured with a bolt. If you like to slightly twist 
your handles over the handlebar, you first need to slightly loosen 
this bolt. After setting them to the desired position you must 
secure the handle again. Don’t turn the bolt too tight, max. 5 Nm 
tightening torque (fig. 16). By holding the Allen key on its short 
side you apply the right amount of strength (fig. 17).

Kickstand

Since you won’t find bike racks everywhere, almost all 
Gazelle bikes are fitted with a sturdy, stable PowerClick stand. 
Lengthwise adjustment with screw (A) is simple and ensures 
that your bike always sits rock solid fig. 18).

On your way

Now your bike has been adjusted correctly. Before you start 
riding, check if everything is secure. Now you can start enjoying 
your new Gazelle. If you want to know more about the technical 
aspects of your bike you can read about the various parts, 
maintenance and minor repairs in the following chapters.

Cy

cling c

omf

or

tably

13

14

15

16

17

18

B

A

INCORRECT

CORRECT

A

Summary of Contents for Bicycle



























Reviews: