ZZZ-209.W1209.1221-20.GP.EN.doc
WEB VERSION
4
TOOLS REQUIRED:
Screwdriver
Knife
File (smooth)
Needle-nosed pliers
Rubber mallet
Step ladder (minmum 6' in height)
Spatula
Power drill
Tube of silicon
Drill bit 5/16" cement
(according to surface)
BEFORE STARTING:
Ensure that you have a solid base,
such as concrete or wooden deck,
not slanted more than 1” per 8’. Avoid
installing unit adjacent to trees or a sloped
roof, as snow and ice may slide onto the
solarium and cause it to collapse.
Please don't destroy boxes until completely assembled.
STEP #1
Decide the position of the door frames before assembly according to where you intend to slide the door. At
the front of the solarium, use frame D3 for the opening of the door and B3 for the direction of the door when
open. Ensure frames A-3 ½ are at the front of the sides. Use E3 between frame ends and use two (2) K3
joints for corners.
NOTE:
When placing the door frame opening,
make sure the inserts on the frame are
on the inside and on the upper half of
the frame of the solarium because the
door will be set on the inside due to
clearance.
NOTE:
When sliding the connectors, shake the
frame so that they will slide easily. Do
not use tools to force. If needed, clean
the paint with a file and make sure the
ends of the frame and joints are not bent
or warped. If so, use the needle-nosed
pliers to straighten.
STEP #2
Slide the vertical guides Vv-3 left and Ww-3 right into the 2 ends of the frames along the grooves, shaking
while sliding for easier movement. Next, slide two (2) Yy-3 and one (1) Zz-3 from left side to
right on top of
the frame. The groove should be towards the interior of the unit. Repeat from right side with two (2) YY-3
and one (1) Zz-3 and space evenly.
