A
C
B
D
06-370
06-370
06-368
06-367
STEPS
1. ASSEMBLY OF MIDDLE ARCHES
a) Take one arch (06-367); assemble with one main corner arch (06-370) on the left side.
b) Insert the other corner arch (06-370) on the right side.
c) Take one completed arch; put screw 1¾" (O) through holes on the right side, attach crossbar (06-368)
over screw and tighten wing nut (Q).
d) Repeat same procedures on the left side.
2. Repeat step 1 for the remaining middle arches.
3. ASSEMBLY OF END ARCHES
(Wing nuts are always on the inside. See schema)
a) Take one arch (06-367); assemble with one end corner arch (06-366) on the left side.
b) Insert the other corner arch (06-366) on the right side.
c) Take one completed arch, put screw 1¾" (O) through holes on the right side, attach crossbar (06-368)
over screw and tighten nut (Q). Repeat same procedure on the left side.
d) Attach one end of door rail (06-372 - 06-373) to an end arch (06-366) with one screw 1¾" (O)
and wing nut (Q).
e) Slide the hooks (M) onto door rail, then install free end over screw 1¾" (O) and wing nut (Q) and tighten.
f) Repeat step 3 with the remaining arch.
g) Place one of the end arches assembled at the front of the shelter, the other at the back.
4. ASSEMBLY OF LEGS
a) Assemble legs (06-365) with connecting pipes (06-371) on all sections except for the front section
with screw (P) and wing nuts (Q).
b) Assemble leg (06-364) with connecting pipe (06-374) and diagonal (06-369) 59
5/8
" with screws 2 ½” (P)
with wing nuts (O).
c) Insert leg (06-364) into an end arch (06-366) one side at a time.
d) Repeat step c) until the whole shelter is completed.
e) Make sure the base is open to 10’8’’, measured from the exterior of the pipes, in front and back (AC, BD)
f) Verify that diagonal distances AD and BC are equal, and lengths AB and CD are equal.
