STEP
1. ASSEMBLY OF MIDDLE ARCHES
a) Take one arch (UD); assemble with one corner arch (UG) on the left side.
b) Insert the other corner arch (UG) on the right side.
c) Take one completed arch; put screw 1¾" (O) through holes on the right side and attach bar (UE)
over screw and tighten wing nut (Q).
d) Repeat same procedures on the left side.
2. REPEAT STEP 1 FOR THE REMAINING MIDDLE ARCHES.
3. ASSEMBLY OF END ARCHES
a) Take one arch (UD); assemble with one corner arch (UG) on the left side.
b) Slide the hooks (M) over bar (UE), then attach one end of the bar to the arch with screw 1¾" (O)
and wing nut (Q).
c) Insert the other corner arch (UG) on the right side and attach to it the other end of bar (UE).
d) Repeat step 3 with the remaining arch.
e) Place one of the assembled end arches at the front of the shelter, the other at the back.
4. ASSEMBLY OF LEGS
a) Insert (UA) legs into one end arch one side at a time.
b) Insert (UB) legs into the remaining arches.
c) Add second arch to assembly by connecting UH and UZ and diagonal (UF) (in 2 pcs for 10’ long)
with screws 2½" (P) and wing nuts (Q).
d) Repeat steps b) and c) until the whole shelter is completed.
e) Verify that diagonal distances AD and BC are equal, and lengths AB and CD are equal.
A
C
B
D
UE
06-393
UD
06-392
UG
23-001
