gaviota KYMA, Installation Manual

Page: 41 / 128

41
KÝMA
All dimensions in mm, unless otherwise stated.
Table B: Materials per configuration Operation:
•
Motor: CROSS BOX (Series 45 and 55).
For set-up with two motors, mechanical operation motors and mechanic limit
switches must be used.*
•
Gear:
Only for two arms maximum projection 3,50m
GEL 1:11 120 eye (code 80010348)
•
Gear square axis caps:
For Ø78 axis: (Code 80020032)
For Ø85 axis: (Code 80020088)
•
Motor or gear round caps:
For Ø78 axis: (Code 80020044)
For Ø85 axis: (Code 80020087)
•
Motor adaptors for each axis:
Motor S45 for Ø78 axis: (Code 60070060)
Motor S45 for Ø85 axis: (Code 60070076)
Motor S55 for Ø85 axis: (Code 60070065)
Coverage diagram per projection and regulation angle:
•
Standard charge profile
Número de brazos, soporte y motores
1 2 3 4 5 6
No. of arms 2 3 3 4 5 6
Arm set 1 2 2 2 3 3
Wall support 2 3 3 4 5 6
Arm support set 1 2 2 2 3 3
Box cover set 1 1 1 1 1 1
B/C cover set 1 1 1 1 1 1
Joint kit - - 1 1 1 1
Profi le set 1 1 2 2 2 2
No. of motors 1 1 1 1 2 2
TANDEM Switchboard - - - - 1 1
Table J: Motors for Ø78 axis
Ø78
axis
Arm projection (m)
1,50 1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50
1
30 Nm
CrossBox S45
40 Nm
CrossBox S45
50 Nm
CrossBox S45
50 Nm CrossBox S45
2
3
Table K: Motors for Ø85 axis
Ø85
axis
Salida del brazo (m)
1,50 1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50
1
40 Nm CrossBox S45 50 Nm CrossBox S45 80 Nm CrossBox S55
50 Nm CrossBox S45 80 Nm CrossBox S55 100 Nm CrossBox S55
4 80 Nm CrossBox S55 100 Nm CrossBox S55 120 Nm CrossBox S55
5
80 Nm
CrossBox S55
100 Nm CrossBox S55 120 Nm CrossBox S55 2x80 Nm 2GS + Tandem S55
6
100 Nm
CrossBox S55
120 Nm CorssBox S55 2x80 Nm 2GS + Tandem S55 2x100 Nm 2GS + Tandem S55
3
2
3
*LIMITATIONS
Motor CROSS BOX S45 (Max. 50N m) Ø78 and Ø85 axis (Electronic)
Motor CROSS BOX S55 (Max. 120 Nm) Ø85 axis (Electronic)
Motor 2GS + Tandem Switchboard (Mechanic)