Instruction Manual
S410.100 Blood Pressure Training System with Speakers
Copyright 2010 by Gaumard® Scientific. All rights reserved.
9
E. Common Failures
In case your simulator is not working properly check the following:
1.
Ensure mini dim connector is plugged into the Blood Pressure Auscultation Tutor.
Check that internal pins on the connector are not bent or broken.
2.
If the calibration feature was initiated, simulator will not exit this mode until calibration is
completed. Calibrate using instructions in Section II Part B.
3.
Attempting to calibrate simulator without changing values with the Blood Pressure Cuff,
will cause values to change randomly. Calibrate using instructions in Section II Part B.
