7
GAUI
GAUI
TAI SHIH HOBBY CORPORATION
TAI SHIH HOBBY CORPORATION
Fuselage Assembly-3
Fuselage Assembly-4
機身組立-3
機身組立-4
M3x4
M3x12
M3x6 12pcs
M3x18
1.Install the Reduction Gear
Unit to the Frames ,
assemble other parts as
shown in figure.
2.Do not tighten those M3x18
screws until the tail
boom is installed and the
gear mesh is set properly.
1.承上頁將左側板組裝至機身。
2.M3x18螺絲含上待P.15頁組裝
時在鎖緊。
Attach the Cuboid Posts to
Front / Bottom / Rear plates,
then assemble those plates
and Main frame set as shown
in figure.
建議可先將側板鋁柱固定於
3片隔板,再連同側板與鋁柱
一起鎖緊。
M3x6 7pcs
M3x6 12pcs