B2X5X2.5
M2X12
P2X3.5X2.5
M2X8.4
M1.4X5
B1.5X4X1.2
W1.4X2.5X0.4
P1.4X2X3.1
M1.4X6
M1.4X6
M2X3
Ø1.4X6
FES 2Blade Head & Swashplate Assembling
Grips and Head Assembling
Mast and Upper Swashplate
Lock Assembling
Top View
Assembled
Parallel
(Fig.4)
The ball link and the arm
shod e perpendicular at
0 pitch degrees (Fig.2)
Install the linkages
Equal
0 Pitch degrees (Fig. 1)
1. The main blade is at 0 pitch degrees.(Fig.1)
2. The arm and the ball link of the Upper Swashplate Lock are perpendicular.(Fig.2)
3. The position of upper swashplate, lower swashplate and the main grips was set as (Fig.3).
4. The arm of the Upper Swashplate Lock and the Main Grips are parallel from top view.(Fig.4)
The position of upper swashplate, lower
swashplate and the main grips.(Fig.3)
IMPORTANT:
The socket set screws of the Swashplate Lock should
be tightened after 4 conditions are all set properly:
Summary of Contents for Hurricane EP200 V2 Series
Page 28: ...200 V2 1...
