5
3. GAN-15A-SW
CONTROL FEATURES
GAN-15A-SW is an active low frequency
speaker with a 15” woofer . The propylene
anti-shock cabinet and heavy duty
protective grille garantee optimal durability.
1 INPUT VOLUME
Use this knob to adjust the volume of the
source connected to the input connector 3.
2 ACTIVE INDICATOR
This indicator will light when the power is
turned on.
3 INPUT
Connect your source to this XLR
connector.
4 VOLTAGE SELECTOR
Make sure you select the correct local
mains voltage; 110 volts or 220 volts.
5 POWER SWITCH
Use this switch to turn the system on and
off.
6 PHASE INVERTING SWITCH
When operating this button the phase
of the output level will be inverted 180
degrees. This is a usefull feature solving
phase problems when using two or more
subwoofer units.
7 HIGH CUT
The high cut filter will set the frequency
bandwith of the signal. The selectable
range varies from 40-80Hz to 40-250Hz.
8 LIMITER INDICATOR
When the preamp input is fed with a too
loud signal, the limiter will be activated
and this indicator will light. Please lower
the volume to have optimum sound quality
and not damage amplifier or speaker
components.
9 OUTPUT
Use this output to patch out full range line
level signal from the preamp.
10 PROTECTION FUSE
This fuse blows in the event of a
malfunction. Replace it with another fuse
of the same type and rating only. For your
convenience, a spare fuse is included in
the fuse holder.
11 POWER SUPPLY INPUT
Use the factory-included (or compatible)
power cable to connect this socket to a
mains outlet. Please make sure you have
selected the correct setting of switch 4!
Summary of Contents for GAN-15
Page 1: ...USER S MANUAL GAN 15 GAN 15A GAN 15A MP GAN 15A SW...
Page 8: ......
