background image

 

 

7

 / 

12

 

 

3. Method of installation 

3.1. Preparation before installation 

3.1.1  Open  the  packing  box  to  check  whether  the  type  of  device  is  correct  and  whether  the 
accessories are included, or else please contact your distributor. 
 
3.1.2 Choose SIM card: each device needs to insert a GSM SIM card. 
Please refer to the distributor’s suggestions to choose the SIM card. 
 
3.1.3  Installing  SIM  card  into  the  tracker,  open  the  device  with  screwdriver  and  put  the  SIM 
card into the tracker (do not insert the SIM card backwards).   
Note: 
Power off before installing SIM card , or removing the SIM card   
The SIM card should have GPRS charge   
Ensure the SIM card is able to send the receive SMS 
 

3.2 Installation 

The device installation is covert. Please refer installation to an auto electrical contractor.     
NOTE: 
3.2.1  To  prevent  theft  of  the  device,  it  should  be  installed  as  covertly  as  possible.  Covertly 
installation is suggested. 
3.2.2 Avoid placing the device close to higher power electrical devices, such as reversing radar, 
anti-theft device or other vehicle communication equipment; 
 
3.2.3 The device should be fixed into position with cable ties or wide double-side tape.   
 
3.2.4 The device has built-in GSM antenna and GPS antenna. During installation, please make 
sure the receiving side face is up, with no metal object above the device to interfere with GPS 
reception. The following places are suggested for installation: 
-shelter in the decorated board below the front windshield; 
-shelter around the front instrument panel (non-metallic material face); 
-in the decorated board below back windshield;   

 

4.

 

Web based tracking online activation 

The GPRS web based tracking platform allows real time tracking with the latest Google maps.   
Service platform login website : 

http://211.154.139.208:8000/webgps/

   

Vehicle management platform website 

http://211.154.139.208:8000/vms/

 

After you added device successfully on the VMS platform , you can send the SMS Commands 
to activate device 
SMS command format 

 

ss,*apn*,*apn_username*,*apn password*,*ip*,*port*,*123456*

 

Summary of Contents for M588T













Reviews: