Head-up display for
G
lobal
P
ositioning
S
ystem
No
.
ITEM
HUD
Operating
Description
1
Power On Self Test
Displaying one cycle LED all light
2
Car Speed Unit
By button
＋
Press and select km/h & Mile/h speed unit
Default km/h speed unit
3
Speed Warning
By S
Press and enter Speed over limit set up
＋
or
－
Per once to up or down to adjust
＋
1 or
－
1
Setting range: 30~ 260 over
Default : 120
(km/h or Mile/ h)
4
Warning Tone
By M
Press and select warning alarm On or Off
The SP symbol light once set at ON mode.
Default is warning tone set at On mode.
5
Speed offset
By S & M
Press two keys in the same time
＋
or
－
Per once to up or down to adjust
＋
1 or
－
1
Setting range:
± 9 Constant
Default :
＋
5
(km/h or Mile/ h)
km/h
Beep sound
OVER LIMIT
Mile/h
－
ADJ
▼
＋
ADJ
▲
SOUND OUT HOLE
GPS ANT IN for Optional
Light
SENSOR
SPEED
POWER in
SPD ADJ
(S)
MUTE (M)
HUD unit Bracket
DISPLAY SET UP
Remarks:
1.GPS HUD signal takes anywhere from 40 sec(s) to 4 min(s) with installation;
After multiple uses, it should take around 10 seconds to 1 minute when driving.
2.GPS signal strength will depend varying factors such as mountains, trees,
housing block or interference from other signals.
