mo8on detect is highlighted in green, when this is done press the OK buAon on the leH top
side of you camera and using the up/down arrow select OFF. This feature must be set to off if
you wish to use your camera as a loop recorder/crash camera.
2) Next press the menu buAon again un8l you see the following (
SETUP MENU)
You will see the following op8ons. FORMAT, LANGUAGE, AUTO OFF etc...
Scroll down using the up/down arrow keys AUTO OFF is highlighted in green, when this is
done press the OK buAon on the leH top side of you camera and using the up/down arrow
select OFF this feature must be set to off if you wish to use your camera as a loop recorder/
crash camera as the
AUTO OFF FEATURE
will turn the camera off completely and is meant to
work with mo8on detect feature.
Your camera is now in loop record mode and we can go ahead and setup the rest of the
menu selec8ons.
Size VGA
will stay as it is
Time Stamp
. This feature will permanently stamp the 8me and date on all you video files
MoFon Detect
. This feature is for ac8va8ng you camera when you want you camera to
record if people are walking past you vehice or you have your car in an unprotected area.
Note if this feature is ac8vated your camera will not loop record and your card will fill up
un8ll your camera says CARD FULL.
Video Fme.
This feature allows you to set your recording block 8mes the op8ons are 1, 3
and 5 minutes so there for if you set this feature to 5 min it will record for 5 minutes save
that block and start a new block this will con8nue un8ll it reaches the end of the card and
start over again (loop recording)
Voice record.
This feature will allow you to record or disable sound inside the cabin of you
vehicle.
SETUP MENU
FORMAT.
This feature allows you to format/delete all the files off your SD card and also
reinstalls your DCIM directory and camera soHware on your SD card so it can operate with
your camera free of errors.
LANGUAGE.
You have a number of languages to select from
AUTO OFF.
This feature will turn you camera off aHer 1, 3 or 5 minutes and will turn your
camera off completely so we suggest this feature always be set to
OFF.
SYSTEM RESET.
This feature will reset all you se3ng and return your camera to the factory
standard se3ngs.
LIGHT FREQUENCY.
This feature allows the best recording in condi8ons where street lights
and ac ligh8ng is used. The Australian standard frequency is 50HZ so it should be set to 50hz.
DATE INPUT.
This feature will allow you to select year, month and day as well as the 8me by
using the up down arrow keys and and the OK buAon to move from year to month etc..
