Installation of the Monitor
4. The monitor has two power wires to be connected. Connect
the red wire (acces12V) to a wire that is energized when
the vehicles accessories is turned on. Connect the black wire to
a ground earth wire or to the body of the car using the steel of
the cars body behind the kick trim as an earth. In this case drill a
small hole and connect the wire using a suitable ring terminal.
Scrape off the cars paint around the hole to ensure good earth.
5. Connect the RCA cable to the RCA socket from the monitors
loom.
1. Engage the park brake and turn the ignition key to the on
position.
DO NOT
start the vehicle.
2. Select reverse gear with the gear shift. The monitor will sense
the video signal from the camera automatically and will display
the camera’s image of the rear of the vehicle.
Testing the reverse camera function
7
Summary of Contents for GRV127KT
Page 12: ......
