Button Instructions
Power Button:
When the DASH CAM is turned off, press it once to turn it on. While the system is on, hold
down the power button to turn it off.
Menu Button
:
Pressing this button once will open the menu. Pressing the menu button again while in the
menu will change to the second settings tab.
Mode Button:
Press the mode button to switch between video mode, photo mode and the file browser
interface.
OK Button:
The OK is used to start recording in video mode. Pressing the button again in video mode will
stop the recording. In photo mode, the OK button is used to take a picture.
The OK button is also used to select a setting in the menu.
Up Button:
The up button is used while in the menu to move the highlighted area for selecting.
The up
button can also be used to zoom in under the standby mode. Pressing the Up button while
recording will turn the microphone on or off.
Down Button:
The down button is used while in the menu to move the highlighted area for selecting. The
down button also allows you to zoom out during standby mode.
Lock Button:
Pressing the Lock button while recording will activate file protection (A white key will be
present if activated).
Micro SD Slot:
Where the Micro SD card is inserted (Max size is 32GB).
USB Interface:
The USB port can be used to charge the device or be connected to a computer for data
transmission.
Reset:
To hard reset the device in the case of a system jam or crash.
Power Indication Light:
When the device is turned on, a blue indicator will light up. When the device is recording, it
will be flashing blue. When the device is charging, the light will glow red.
Battery Charging Indication Light:
After connecting the DASH CAM through USB, the indication lamp will glow red meaning it
is charging. The light will automatically turn off after fully charged.
Summary of Contents for GHDVR350
Page 1: ...USER GUIDE GHDVR350...
