Settings
Volume:
To change the default volume of the device, press the
Volume Button(13) whilst the device is on. Each press will
cycle up through the values (0-9/ 0 is Mute)
Time Zone:
To change the default time zone of the device, press and
hold the Reset button(17) whilst the device is off (vehicle
ignition is switched off). Then switch on the vehicle ignition,
the current time zone setting will be displayed on the
Temperature/Voltage display (8)(9).
Note: The default time zone is set to GMT.
Press the Power Button(17) to cycle to the desired value and
then turn off the device. When the device is next powered on,
the time zone will be set to the chosen value.
Measurement:
To measurement readings (speed, altitude,temperature) of
the device can be adjusted from metric to imperial.
Note: The device is set to Metric by default.
To change the measurement type, Press and hold the Volume
Button(13) whilst the device is off (vehicle ignition are
switched off). Then switch on the vehicle ignition. The 'km/h
'M' 'C' (Metric) or 'mph', 'Ft, 'F' (Imperial) will be
6
Speed
Altitude
Temperature
Metric
Km/h
m
°C
Imperial
Mph
ft
°F