7
Installation of the Dash Cam
1
. Check the mounting position of the Dash Cam camera first
before installation.
2
. Ensure windscreen is clean and free of debris. Use an Alcohol
wipe to enhance adhesion.
3
. Place mounting bracket on Dash Cam after checking Dash
Cam position. Remove backing off 3M tape and press & hold
firmly to windscreen for 60 seconds.
4
. Fix where the vision is not blocked (Place close to rear-view
mirror is recommended). Do not install the device on airbag or
within its working range.
5
. Insert Micro SD card into the Dash Cam
6
. Insert power cable into the DC-in of the Dash Cam. Connect
the DC charging end of the power cable into the 12V power
socket of your vehicle.
7
. Adjust the camera angle to get the best view. Ensure 1/4 of
the vehicles bonnet is visible from the bottom of the screen for
alignment.
8
. Turn vehicles ignition on, and the Dash Cam and it will
automatically start recording.
9
. When recording the recording indicator LED will flash red.
10
. For the Dash Cam to work it must receive power from the
charging adapter. Once power is removed or turned off the Dash
Cam will save the current file and turn off.
