www.connects2.com
2
Connects2
Vision
CONTENTS
- Camera with 35cm cable to Male 4pin camera connector
- 10m Female 4pin to Video RCA and +/- 12V DC power extension cable
- Instructions
INSTALLATION
1. Remove the factory installed third brake light from the vehicle and unplug
the connection cable.
2. Connect the new combined brake light/camera assembly to the brake light
connector and test to ensure correct brake light operation.
&RQQHFWWKHÀ[HGFDPHUDFDEOHFRPLQJIURPWKHQHZDVVHPEO\WRWKH
FRQQHFWLRQSURYLGHGRQWKHH[WHQVLRQFDEOHDQGÀWWKHOLJKWFDPHUDWRWKH
vehicle in place of the factory light that you have removed, taking care not to
trap any of the cables.
4. Connect the Black wire to a suitable ground and connect the Red wire to
the reversing light circuit or an interface which provides a reverse signal.
5. Connect the extension cable to the display screen and ensure that the im-
age is displayed correctly.
Subscribe to our YouTube Channel for installation
guides and tips...
www.youtube.com/connects2