information
password#IP#port#password#
Eg:
#SERVER#CMNET#211.154.139.208#8885#000000#
username or password,
then we only edit APN in
the command like the
example.
Set low power alert
#POWER#status number#password#
Eg: #POWER#1#000000#
Alert SMS content, eg:
Low power alarm from GATOR, the current location is
http://maps.google.com/?q=23.12345,120.12345
Status number:
1=open the low power
alert
0=close the low power
alert
Default setting is status 1
Set time zone
#TIMEZONE#E/W#HH:mm#
Eg: #TIMEZONE#E#05:30#
E=Eastern hemisphere
W=Western hemisphere
HH=hours
Mm=minutes
The default time zone is
according to GMT+8, Pls
set to your time zone
Set interval
#INTERVAL#interval time(unit: s)#password#
Eg: #INTERVLA#60#00000#
When it is set ok, the
device will upload data to
software at the set
interval.
Set Working mode
#MODE#mode number#password#
Eg: #MODE#0#000000#
Mode number:
0=GPRS mode
1=SMS mode
Set Emergency mode
#SOS#password#
Eg: #SOS#000000#
When you activated the
emergency mode, the
device will upload data to
server at 10s interval for
5 minutes, then back to
the preset interval again.
Check GPS location
#LOCATION#password#
Eg: #LOCATION#000000#
Replied SMS content, eg:
The current location of GATOR is
http://maps.google.com/?q=23.12345,120.12345
You can get the current
location data from the
device
Check working status
#CHECK#password#
Eg: #CHECK#000000#
Replied SMS content, eg:
Device ID:IMEI number; Phone number:13512345001,
You can get the current
working status
information from device
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
