Gato Audio FM-6 - 2½-way Speaker
Page 4
Installation
Using spikes
Mounting the driver grilles
The grilles are easily fastened to the speakers magnetically when the small magnets on the grille are alligned on top of the driver screws.
1.
Assemble all fasteners
with the spikes
2.
Place the 4 spikes in the
holes of the plinth by
screwing them in clockwise
3.
Screw the spikes up or
down to adjust the speaker
height from the fl oor, so
all spikes are touching the
fl oor at the same time
4.
Turn the fastener clockwise
until it is positioned tightly
against the plinth. Make sure
the spike does not turn during
the process by grasping it with
your other hand if necessary
1.
Place and hold the grille lightly on top of the driver as
shown below
2.
Turn it clockwise or counter-clockwise until you can
feel the magnets attach to the screws below.
WARNING:
Please note that using spikes under your speakers will invariably leave marks on your fl oor or any other surface that you place
the speakers on. Gato Audio cannot accept any responsibility for any type of damage to fl oor, furniture surfaces, marriage or anything
else resulting from the use of spikes. It is up to you and your family to consider carefully beforehand whether the improvements in sound
quality and performance can outweigh the possibility of any inconvenience caused.
To detach the grille from the speaker simply turn the grille clockwise or counter-clockwise and remove it.
