Gato Audio FM-30, User Manual

Page: 6 / 12

Gato Audio FM-30
Page 6
WARNING: Please note that using spikes under your speakers will invariably leave marks on your fl oor or any other surface that you place
the speakers on. Gato Audio cannot accept any responsibility for any type of damage to fl oor, furniture surfaces, marriage or anything
else resulting from the use of spikes. It is up to you and your family to consider carefully beforehand whether the improvements in sound
quality and performance will outweigh the possibility of any inconvenience caused.
Mounting the driver grilles
The grilles are easily fastened to the speakers magnetically when the small magnets on the grille are aligned on top of the driver screws.
1.
Place and hold the grille lightly on top of the driver as
shown below
2.
Turn it clockwise or counter-clockwise until you can
feel the magnets attach to the screws below.
To detach the grille from the speaker simply turn the grille clockwise or counter-clockwise and remove it.
Installation
Using spikes
1.
Place the 4 spikes in
the holes of the plinth
by screwing them in
clockwise
2.
Turn the spikes up or down
to adjust the speaker height
from the fl oor, so all spikes
are touching the fl oor at the
same time
3.
Turn the fastener clockwise
until it is positioned tightly
against the plinth. Make
sure the spike does not
turn during the process by
grasping the top with your
other hand if necessary
4.
The spike feet can be
applied to protect the
surface underneath the
spikes