Instructions for SW200DC
www.gatexpertstore.com
20
9.7.2 Base Menu Instruction
Menu
Press "PROG" to
enter into base menu.
Option
Press “+”(up) or “-”(down) to select;
Press “SET” to confirm.
Default/Attention
Working Mode
Standard mode; O/C/S
(Open/Close/Stop).
O/S/C standard mode with
automatic closing function. When the
gate opens, it will automatically close
after automatic closing time. If a “close
the gate” command is sent during the
automatic closing time waiting time, the
automatic closing function will be
canceled.
Community
mode(with
automatic closing function). When the
gate opens, any gate command will not
be
responded
until
it
closes
automatically.
If user sends gate
command during the closing process,
then the gate will reopen. If a gate
command is sent during the automatic
closing waiting time, this waiting time
will be recalculated. If the gate is not
closed completely for more than ten
consecutive times, the automatic
closing function will be canceled and
the gate will be closed by re-sending the
gate closing command. Note that in
Standard
mode; O/C/S
(Open/Close/Stop).
Low consumption
mode on
Low consumption
mode off
Low
consumption
mode
