Gateway MX6708, Hardware Reference Manual

Page: 47 / 72

Replacing the hard drive kit www.gateway.com
43
13
Remove the four screws that secure the hard drive to the hard drive bay
cover.
14
Remove the cover from the old drive.
15
Place the new drive, label side up, onto the cover so the screw holes line
up.
16
Replace the screws that secure the cover to the drive.
17
Slide the new hard drive kit into your notebook, then replace the screws
that secure the hard drive kit to the notebook.
18
Insert the battery(ies), then turn your notebook over.
19
Connect the optional port replicator.
-OR-
Connect the power adapter, modem cable, and network cable
20
Turn on your notebook.
21
For instructions on installing Windows, your drivers, and your applications,
see the “Recovering Your System” chapter you printed in
Step 2 .
Screws Screws