Gateway MX6708 Hardware Reference Manual Download

Page: 21 / 72

Using the status indicators

www.gateway.com

Using the status indicators

Important

If none of the indicators are on, you may
need to press

+F1

to toggle the status

indicators on.

Status indicators inform you when a drive is being used or when a button has
been pressed that affects how the keyboard is used. The status indicators are
located below the touchpad.

Indicator

Icon

Description

Wireless network (optional)

■

LED on - wireless IEEE 802.11 radio is turned on.

■

LED off - wireless IEEE 802.11 radio is turned off.

Caps lock

■

LED on - caps lock is turned on.

■

LED off - caps lock is turned off.

Num lock

■

LED on - numeric keypad is turned on.

■

LED off - numeric keypad is turned off.

Module

■

Indicator blue- module is in use.

■

Indicator solid purple - module is ready to swap.

■

Indicator flashing purple - module is not
installed in the notebook.

Hard drive

■

LED blinking - hard drive is in use.

■

LED off - hard drive is not in use.

Hard drive

Caps lock

Num lock

Wireless network

Module

Summary of Contents for MX6708









































































Search results

Summary of Contents for MX6708

Reviews:

Related manuals for MX6708

Brands by name

Popular brands

Gateway MX6708, Hardware Reference Manual

Search results

Summary of Contents for MX6708

Reviews:

Related manuals for MX6708

Brands by name

Popular brands