Gateway MX6633, Hardware Reference Manual

Page: 43 / 68

Replacing the hard drive kit www.gateway.com
39
9
Remove the two hard drive bay cover screws, slide the hard drive bay
cover, then remove it. The hard drive is attached to the back of the cover.
10
If your new hard drive already includes the hard drive cover, go to Step 15 .
-OR-
If you need to move the hard drive cover from your old hard drive to your
new hard drive, go to
Step 11 .
11
Remove the screws that secure the hard drive to the hard drive cover.
Screws Screws