Gateway ML6228, Reference Manual

Page: 57 / 134

www.gateway.com
51
Recharging the battery
The battery recharges while it is installed and your notebook
is connected to AC power. While the battery recharges, the
battery charge indicator turns on.
Changing batteries
Replacing the battery
To replace the battery:
1
If your notebook is on and is connected to AC power,
go to
Step 2 .
-OR-
If your notebook is on and is not plugged into an AC
outlet, save your work and turn off the notebook.
2
Close the LCD panel.
3
Turn your notebook over so the bottom is facing up.
4
Slide the battery lock to the unlocked position.
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for your Gateway
notebook. Discard used batteries according to local hazardous material
regulations.
The battery used in this device may present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate.
Dispose of used battery promptly. Keep away from children.
Caution
If your notebook is connected to AC power, you can change the battery
while the notebook is turned on. If your notebook is not plugged into an AC
outlet, you must turn the notebook off while changing the battery.