Gateway MAN FX510 Reference Manual Download Page 63

Page: 63 / 150

www.gateway.com

Disconnect the fan cable from the system board. The
location of the fan connection may vary, so trace the
fan cable from the fan to the system board.

Remove the fan mount by pressing in on the flat area (1)
near the front, then rotating the fan mount (2) back.

Slide the old fan out of the fan mount.

Slide the new fan into the fan mount.

Insert the tabs on the rear of the fan mount into the
slots provided, then rotate the mount into place. The
mount should lock into place.

Caution

Be careful not to catch the wires connecting the power button

to the system board when rotating the fan mount. A notch has been
provided for routing these wires.

8512066.book Page 57 Tuesday, January 16, 2007 11:02 AM

Summary of Contents for MAN FX510























































































































































Search results

Summary of Contents for MAN FX510

Reviews:

Related manuals for MAN FX510

Brands by name

Popular brands

Gateway MAN FX510, Reference Manual

Search results

Summary of Contents for MAN FX510

Reviews:

Related manuals for MAN FX510

Brands by name

Popular brands