26
Replacing Gateway M350 Components
www.gateway.com
11
Verify the black plastic hinge on the system board keyboard connector is
in the raised position.
12
Insert the end of the keyboard cable between the black plastic hinge and
the white connector.
13
Press the black plastic hinge onto the keyboard cable.
14
Rotate the keyboard toward the LCD panel until the keyboard is almost
face-up.
15
Insert the four tabs located on the front edge of the keyboard into the
corresponding slots under the palm rest.
16
Gently press the keyboard down until it is flat all the way across. The
keyboard should easily fall into place. Be careful not to damage the
LCD panel.
Important
The cable is correctly oriented if it is not twisted.
Tabs
