Gateway M-7301U Reference Manual Download

Page: 18 / 164

CHAPTER

: Checking Out Your Notebook

Component

Icon

Description

Hard drive
bay

The hard drive is located in this bay. For more
information, see

“Replacing the hard drive kit” on

page 98

Customer
Care label

Includes the Customer Care contact information. For
more information, see

“Gateway contact information”

on page 3

Battery latch

Slide to release the main battery. For more
information, see

“Changing batteries” on page 59

Docking port

Connect the optional port replicator to this port.

Warning:

Power is passed through this port. This

docking connection is certified to UL 1950 for use only
with port replicators designed for your Gateway
notebook.

Main battery

Provides power when the notebook is not plugged
into AC power.

Battery lock

Slide to unlock the main battery. For more
information, see

“Changing batteries” on page 59

Memory bay

Install a memory module into this bay. For more
information, see

“Adding or replacing memory

modules” on page 95

System label

Includes the model number of the notebook.

Modular bay
latch

Slide to release the module. For more information, see

“Changing modules” on page 40

Summary of Contents for M-7301U





































































































































































Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands

Gateway M-7301U, Reference Manual

Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands