Gateway M-7301U Reference Manual Download

Page: 106 / 164

CHAPTER

: Upgrading Your Notebook

Replace the memory bay cover, then tighten the cover
screws.

Replace the keyboard screw.

Insert the main and optional secondary batteries, then
turn your notebook over.

Connect to the optional port replicator.

-OR-

Connect the power adapter, modem cable, and network
cable.

Reconnect all peripheral devices and replace any
PC cards.

Replacing the hard drive kit

If you would like more hard drive capacity, you can replace
your original drive with a higher-capacity drive.

To replace the hard drive kit:

Create a

Drivers and Applications Recovery

disc using

the Gateway Recovery Center. For more information,
see

“Recovering pre-installed software and drivers” on

page 81

Tip

The screw hole is marked with a K.

Tools

You need a small Phillips screwdriver to replace the hard drive kit.

Hard drive kit

Summary of Contents for M-7301U





































































































































































Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands

Gateway M-7301U, Reference Manual

Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands