Gateway LT 1000, Reference Manual, Page: 43 / 102

www.gateway.com
37
2
Double-click the drive letter (for example, the E: drive),
then double-click the file name.
Removing a memory card
To remove a memory card:
1
Push the memory card into the notebook. The memory
card pops out slightly.
2
Pull the memory card out of the notebook.
Installing a printer or other
peripheral device
Your notebook has one or more Universal Serial Bus (USB)
ports. You use these ports to connect peripheral devices such
as printers, scanners, and digital cameras to your notebook.
USB ports support plug-and-play and hot swapping , which
means that your notebook will usually recognize such a device
whenever you plug it into the appropriate port. When you use
a USB device for the first time, your notebook will prompt you
to install any software the device needs. After doing this, you
can disconnect and reconnect the device at any time.
Important
Do not use the remove hardware icon in the taskbar to remove the
memory card. If you use the remove hardware icon, your notebook may not
recognize your memory card reader until you restart your notebook.
Important
Before you install a printer, scanner, or other peripheral device, see the
device documentation and installation instructions.
Help
For more information about installing peripheral devices, click Start , then
click Help and Support. Type the keyword
installing devices
in the Search
Help box, then press E
NTER
.