46
www.gateway.com
Chapter 4: Installing Components
To install or replace memory:
1
Follow the instructions in
“Preventing static electricity discharge” on page 29
2
Follow the instructions in
“Opening the server case” on page 30
.
3
Pull the plastic tabs away from the sides of the memory module slot. If you are
replacing a memory module, remove the old module.
4
Align the notch on the new module with the notch in the memory module slot and
press the module firmly into the slot. The tabs on the sides of the memory slot should
secure the memory module automatically.
5
Follow the instructions in
“Closing the server case” on page 37
6
Restart your server and open the BIOS Setup utility. Verify the
System Memory
listed
in the Main menu. When you exit the BIOS Setup utility, make sure that the operating
system loads completely.
10879-C4.fm Page 46 Friday, August 5, 2005 9:30 AM
