Gateway E-842R, User Manual

Page: 73 / 164

Deleting a SAN LUN mapping www.gateway.com
67
5
Review your settings, then click APPLY . When you see the confirmation
message, click OK to continue or click CANCEL to exit and return to the
SAN LUN Mapping window.
6
Continue to create more mappings by repeating the above procedures,
or end this session by clicking
CLOSE .
Deleting a SAN LUN mapping
To delete a SAN LUN mapping:
Important
Prior to deleting a SAN LUN Mapping,
clear your Web browser’s cache (with
Internet Explorer the function is known as
deleting Temporary Internet Files), then
proceed with removing the mappings.
1
From the Main window, click SAN Mapping in the Configuration tool bar.
The SAN LUN MAPPING window opens.
2
Select the Host HBA port, or the user name that you gave the port, that
contains the mapping you want to delete in the
HBA Ports Name section.
3
Select the mapping you want to delete in the MAPPINGS section, click
REMOVE MAPPING , then click APPLY .
If there are multiple mappings for this Host Port and you want to remove
them all, you can press and hold the shift key when you click to select all
the mappings.
4
When you see the confirmation message, click OK to continue or click
CANCEL to exit and return to the SAN LUN Mapping window.
5
Continue to remove more mappings by repeating Step 2 through Step 4 ,
or end this session by clicking CLOSE .